User manual

Chapter 3. Local Operation
25
Adjust Video
Video Gain and Video Compensation can be adjusted for all displays at once,
or for each display individually. To adjust video, do the following:
1. Use the MENU button to access the Adjust Video page.
2. With the cursor flashing at Adjust Video Level, press Enter to go to the
Optimize Video Output Port page to select ports.
3. Use the Up / Down pushbuttons to cycle through the ports and select for
optimization.
You are able to select all ports in the installation (ALL), just the local port
(L), or any of the 8 ports individually (1–8).
Press Enter to select.
4. Select Gain or Compensation, then cycle through the options to adjust
values for the local port.
Options are Stored, Auto, or 0–31. See page 27 for storing values,
Note: If either Gain or Compensation is set to Auto, the other will also set
to Auto automatically.
MENU
AUDIO
ESC
ENTER
Adjust Video Level
Adjust Audio Level
MENU
AUDIO
ESC
ENTER
Optimize Video Output Port: All
MENU
AUDIO
ESC
ENTER
Local Video Output Gain: 31
Local Video Output Compensation: 31