User manual

VM0808T User Manual
28
Security Mode
The Security Mode page allows you to configure the VM0808T’s password-
related settings.
Password Settings
To configure the VM0808T’s password settings, do the following:
1. Use the MENU button to access the Security Mode page.
2. To set the VM0808T to require a password for local operation, select
Password required, and use the Up / Down pushbuttons to select Yes or
No.
3. To change the password, use the Down pushbutton to move the cursor to
Change Password.
4. Enter the old password (see Enter Password, page 17). Then, press enter
to move the cursor down to New Password, and enter the new password in
the same way.
5. Press and Release Enter to confirm the password and continue to the Main
Screen.
Note: 1. If you enter an incorrect password, re-enter the correct password
over the incorrect string.
2. If Password Required (see Security Mode, page 28) is enabled,
the timeout is 5 minutes.
MENU
AUDIO
ESC
ENTER
Saving / Calling Profile
Security Mode
MENU
AUDIO
ESC
ENTER
Password Required: Yes
Change Password
MENU
AUDIO
ESC
ENTER
Old Password: 1 2 3 4
New Password: 0 0 0 0