User manual

Chapter 4. Remote Operation
37
User Management
Click the User Management icon to add, edit, or remove user information, and
to change the password for accessing the VM0808T’s GUI.
Note: This is an Administrator only function.
Operations are as follows:
 Add User – Click Add to add another user to the list. The VM0808T
supports up to 32 users at one time.
 Edit User – Select user and click Edit to change information. This option
allows an Administrator to set/reset the selected user’s password, add a
description of the user, and to set the user’s privileges. See below for full
details.
 Delete User – Select user and click Delete to remove all user information.
Password
Use the Edit User function to change the user’s password for accessing the
VM0808T’s GUI. This password is also used for the Telnet interface (see
Telnet Configuration, page 34). Passwords are case sensitive, and must be 5–
16 alphanumeric characters.
Privileges
Use the Edit User function to set a user’s privileges. The three available levels
are as follows:
 Administrator – this level provides full access and control of the
VM0808T functions in addition to full User Management privileges
 Super User – this level provides full access and control with no User
Management privileges
 User – this level provides basic functions only (create connections,
save and recall presets, adjust audio)