User manual

VM0808T User Manual
38
Telnet Operation
The VM0808T can be operated and configured via a remote terminal session
using Telnet.
To log in to the VM0808T by means of a Telnet session, do the following:
1. On your computer, open a terminal (command line) session.
2. At the prompt, key in the VM0808T’s IP address in the following way:
telnet [IP address]:23
3. Press Enter. The login screen appears. At the login prompt, provide your
Username and Password.
Configuration Menu
Once a Telnet connection to the VM0808T is established, the device’s text-
based Configuration Menu comes up, with the following items:
1. H – Call up the command list for help
Command list:
GT – Set gateway address
IM – Set IP subnet mask
IP – Set IP address
LO – Load connections from profile
PW – Change password
RI– Read what output is connected to nn input
RO – Read what output is connected to nn input
SB – Set the serial port baud rate
SS – Switch input to specified port
TI – Set timeout
VR – Software version information
Ctrl-Q – Quit