User manual

Chapter 4. Remote Operation
39
2. GT – Set gateway address
GT
Old gateway address: 192.168.1.1
New gateway address:
3. IM – Set IP subnet mask
IM
Old IP subnet mask: 192.168.1.1
New IP subnet mask:
4. IP – Set IP address
IP
Old IP address: 192.168.1.45
New IP address:
5. LO – Load connections from profile
LO 01
Load profile 01 OK.
6. PW – Change password
PW
Old password: ********
New password:
7. RI – Read what input is connected to nn output
RI 01
Output port 02 04 08 is connected input port 01
8. RO – Read what output is connected to nn input
RO 01
Input port 02 is connected to output port 01