Datasheet

VS0201 / VS0401 User Manual
12
Switch Port Commands
The formulas for Switch Port commands are as follows:
1. Switch Command + Input Command + Port Number [Enter]
For example, to switch the input port to port 02, type the following:
sw i02 [Enter]
2. Switch Command + Control [Enter]
For example, to switch to the next port, input the following:
sw + [Enter]
The following tables show the possible values and formats for the Input
command, Port Number and Control:
Note: 1. Each command string can be separated with a space.
2. If the Port Number string is skipped, the default value is used.
The following table shows the available command list:
Command Description
sw Switch command
Input Command Description
i Input command
Port number Description
xx 01-04 port (default is 01)
Control Description
on Turn on the display
off Turn off the display
+Next Port
- Previous Port
Command Input Port Control Enter Description
sw i xx [Enter] Switch to Input Port xx
sw xx on [Enter] Turn on Display
xx
off [Enter] Turn off Display
sw + [Enter] Switch to the next input
- [Enter] Switch to the previous input