User manual

VS0201 / VS0401 RS-232 Control Tool
12
Switch Mode
On the Switch Mode page, the following actions are possible:
Mode
Select the Mode you want the VS0201 / VS0401 to apply when a new input
source is connected:
 Default – The switch behaves normally without automatic switching
operation.
 Next(*) – Switch priority is placed on the next port that has a new
source connected to it (default).
 Auto – Places priority on the selected port so that when a source is
connected to the said port, the VS0201 / VS0401 automatically
switches to it, and the port can not be changed until the source is
unplugged or auto switching is disabled. Select an Input port from the
drop-down menu (options are ports 1–4) to which the Auto mode
applies.
Go To Function
The Go To function enables the VS0201 / VS0401 to switch to the next port
with a powered on source device when the current input source is off.
 Click ON to enable Go To function
 Click OFF to disable Go To function
 Click Send to send the command