VS481A HDMI Switch RS-232 Control Tool v1.0.064 User Manual www.aten.
VS481A RS-232 Control Tool FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications.
VS481A RS-232 Control Tool RS-232 Control Tool Operation Overview The VS481A’s built-in bi-directional RS-232 serial interface allows system control through a high-end controller, PC, and/or home automation / home theater software package. RS-232 serial operations in a VS481A installation can be managed via a Graphical User Interface (GUI) on systems that are running Windows. In order to use this Control Tool, two separate items of software must be installed on all of the PCs in your installation – .
VS481A RS-232 Control Tool GUI Main Page The RS232 Control Tool is a convenient and intuitive method to manage the RS-232 commands in your VS481A installation from one screen. To invoke the GUI, simply click on the icon in your file system. The interface appears, and opens on the Switch Port page by default, as below: The various elements of the GUI are described in the following sections.
VS481A RS-232 Control Tool Switch Port On the Switch Port page, the following actions are possible: Click on a port number (1–4) to change the input to that port. Click Send to send the command Click Previous to change the input port to the previous port. Click Send to send the command. Click Next to change the input to the next port in the sequence. Click Send to send the command. Switch Port Commands These actions can also be performed by keying the command into the text box, and clicking Send.
VS481A RS-232 Control Tool The following tables show the possible values and formats for the Input port, Port Number and the Port Sequence: Command Description sw Switch command I/O Port Description i Input Port Port number Description xx 01-04 port (default is 01) Port Sequence Description + Next Port - Previous Port Note: 1. Each command string can be separated with a space. 2. The Input port command string can be skipped, and the default value(s) will be used.
VS481A RS-232 Control Tool Power The Power page provides two options – Power On and Power Off, as shown above. To power on the device, click ON (or enter the command sw on in the text box) and click Send. To power off the device, click OFF (or enter the command sw off in the text box) and click Send.
VS481A RS-232 Control Tool Power On Detection The Power On Detection provides two options – Power On and Power Off, as shown above. To enable Power on Detection, click ON (or enter the command pod on in the text box) and click Send. To disable Power on Detection, click OFF (or enter the command pod off in the text box) and click Send.
VS481A RS-232 Control Tool RS-232 Setting The controller’s serial port should be configured as follows: Baud Rate 19200 Data Bits 8 Parity None Stop Bits 1 Flow Control None To select the serial port, do the following: Select a port from the drop-down menu and click CONNECT.
VS481A RS-232 Control Tool 10
