Specifications

1. Specify type of controller required.
2. Amperage required per zone? (heater wattage x voltage)
3. How many zones of control are required?
4. Specify the mainframe cabinet.
• Size frame required is the number of control modules
plus any accessory modules.
• If 15 amp modules are used, specify MFL style frame.
• If 30 amp modules are used, specify MFH style frame.
• If an accessory module or Series RMC controller is used,
specify an MFL-C or MFH-C style frame.
• If a current/voltage monitor is required, specify CV suffix
in mainframe ordering code. (IMP only; not applicable to RMB or RMC)
Note: Contact factory for combination mainframes
(15 A and 30 A together).
5. Specify Accessory Modules.
• IMP modules can be used with a Standby Alarm Module (SAM)
(Refer to page 14.
6. Specify cables, connectors, and terminal mounting boxes.
7. Choose optional mainframe accessories:
Floor stands
Transformer kits
Closure panels
Notes: Athena’s mainframes are compatible with all
D-M-E Company’s G SERIES and SMART SERIES
®
, ITC, MCS, Yudo
®
,
and Incoe
®
brand mainframes.
Use ”D” ordering suffix for 60 Hz and °F
Use “X” ordering suffix for 50 Hz and °C
Use “E” ordering suffix for 50 Hz and °C, CE-compliant
G SERIES and SMART SERIES are trademarks of D-M-E Company; YUDO is a
trademark of Yudo Co., Ltd.; INCOE is a trademark of Incoe Corp.
ORDERING SPECIFICATIONS
HOW TO ORDER A HOT RUNNER CONTROL SYSTEM
Up to 48 zones
15 or 30 amp
IMP, RMB, or RMC
See page 15
SAM
See pages 22 to 27
See page 28