Atll',tic, Magnetic Elliptical Bike OWNER'S MANUAL IMPORTANT! Please read all instructions carefully before using this product. Retain this manual for future reference.
· . IMPORTANT SAFETY NOTICE Note the following precaution before assembling and operating the machine. 1. Assembie the machine exactly as the descriptions in the instruction manual. 2. Check all the bolts, nuts and other connections before using the machine for the first time to ensure the machine is in the safe condition. - 3. Set up the machine in a dry level place and keep it away trom moisture and water. 4. Place a suitable base (e.g. rubber mat, wooden board etc.
EXPLODED DIAGRAM ~------31 ~ 12 30 29 49 2 4 4 28R 26 27 50 13 51 7 24R 19 l8R 7------; 1,j-----,~TI ~--7 ~----7 I-r----, 11 10 45 8 53 NO FE: Most of the listed assembly hardware has been packaged separately, but same hardware items have been preinstalled in the identified assembly parts. In these instanees, simply remave and reinstall the hardware as assembly is required. Please reference the individual assembly steps and make note of all preinstalled hardware.
PARTS LIST No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18UR 19 20 21 22UR 23 24UR 25 26 27 28UR 29 30 31 32 33 34 35 36 37UR 38 39 40 41 42 43 44 45 46 Description Main frame Cap nut M8 Arc was her <1>20 xd8.5xR30 End cap of rear stabilizer Rear stabilizer Carriage bolt M8x74 Bushing Pedal tube link Tension cable Nylon nut M10X1.25 Cap S17 Computer Big washer <1>8.2x<1>32x2 Flat washer cp1 0.
ASSEMBLY INSTRUCTION . PREPÄRATioN: Before assembling, make sure that you will have enough space around the item; Use the present tooling for assembling; before assembling please check whether all needed parts are available. It is strongly recommended this machine to be assem bied by two or more people to avoid possible injury. Step 1: Attach the front & rear stabilizer (43, 5) to the main frame (1) with the carriage bolt (6), arc washer (3) and cap nut (2).
Step 3: I : Attach the handrail (24R) to the vertical tube shaft of the vertical tube (1) with Allen bolt (27), big washer (13). Note: Don't loek in order to attach the pedal tube to crank easier. II: Attach the pedal tube link (8) to the crank (21) with flat washer (45), spring washer (53) and nylon nut (10).And then tighten it with the A"en bolt (23,27) and nylon nut (10).Attaching the left handrail (24L) is in the same way.
Step 5: Attach the handrail (28L, 28R) to the leftlright handrail arm (24L, 24R) with carriage bolt (29), arc washer (49) and cap nut (2). t-----~8R H----29 r------49 ,----~ 2 29L - 2 24k:-l--j 1-- - --24R Step 6: Attach the handlebar (33) to the vertical tube (38) with hex pan head screw (48) arc washer (49) and cap nut (2). - - . -- 38 Step 7: Connect the pulse wires (34) and upper sensor wire (40) with the wires come from the computer (12).
Console Instructions JS-I006B o ~., CA< "" , , BUTTON: 1.MODE: Press to select all functions in sequence. Hold the button for 2 seconds to total reset all function values. 2.SET: Press to set function value. 3.RESET: Press to reset function value. FUNCTIONS: 1.SCAN: Automatically scan through all functions. 2.TIME: Automatically count up exercise time during exercise. Automatically count down exercise time trom target during exercise. 3.SPEED: Display current exercise speed during exercise 4.
18 kg rotation mass 140 kg max body weight Tension level system Magnetic break system Steel frame construction.