User’s Manual FCC ID: SF4‐BTSP04 Bluetooth Stereo Speaker BTSP04 1
Catalog Summary..............................................................................2 BTSP04 Bluetooth speaker overview ............................................3 Package contents list……………………….......................………..…………4 Pairing...................................................................................4 Charging the battery .............................................................6 Battery information ...............................................................
1. Summary BTSP04 is a portable Bluetooth wireless speaker that comes with ultra‐small size. It is compliant with Bluetooth V3.0 specification, can be easily connected wirelessly to a mobile phone, PC or MP3 player if they are A2DP‐enabled. BTSP04 can use for phone call conversation as a hands‐free speaker. For more details, please read the user guide following.
2.
3. Package contents list: 1) 2) 3) BTSP04 speaker User Manual Charging Cable 4. Pairing Before you use BTSP04 the first time, you must pair the unit with a Bluetooth® enabled mobile phone or other devices. Pairing is an one‐time process and required only for the first connection with the Bluetooth host device. This instruction is based on a Bluetooth enabled phone as the host device. Please refer to the following steps to pair BTSP04. [Pair with Bluetooth phone] 1) Slide the power switch to ON.
it is now ready for pairing. Activate your mobile phones Bluetooth function by referring to your mobile phone’s instruction guide for details, start to search the Bluetooth devices. 5) Select “BTSP04” from the new device list. 6) Enter the PIN code “0000” and confirm to complete pairing. When pairing is completed the BTSP04 will connect to your phone automatically, a few seconds later enter to standby mode. Important: If pairing is not completed within 2 minutes, the speaker will turn off.
3) When the charger is connected, the indicator light is solid red during charging. Charging the battery fully may take up to 2 hours. 4) When the battery is fully charged, the red indicator light turns off and turn on the blue indicator. Please disconnect the charger from the speaker and the wall outlet. 5) When the speaker is powered on and battery power is low, the speaker will notify you with beeps every 20 seconds. The indicator light will turn red.
battery from the device since it would damage the device. The full performance of a new battery is not achieved until after two or three complete charging‐discharging cycles. The battery can be charged and discharged several hundred times, but it looses its capacity over time. Disconnect the BTSP04 from the power supply as soon as the battery is fully charged, overcharging would reduce the service life of the battery. A charged battery will lose its capacity if it is not used on a regular basis.
If the speaker has completed the paring operation successfully, when the speaker turns on, it will connect to the phone you last connected automatically. Please ensure your phone’s Bluetooth function is activated. [Turn off the speaker] At any working state after the speaker is powered on, press and hold MFB for 5s, you will hear a tone, and the red indicator flashes in red, the speaker has now powered off.
Bluetooth device, please try the following steps: 1) Ensure the speaker is charged fully and it is paired with your mobile phone. 2) Ensure the speaker is not connected with other Bluetooth device. 3) Ensure you’re mobiles Bluetooth feature is activated. 4) Ensure the speaker is within a maximum of 10 meters of your mobile and there is no obstruction, such as walls or other electronic devices in between. 11.
heat. It may cause explosion, degrade performance and/or reduce battery life. 5) Do not modify, repair, or disassemble unit. Battery may explode. 6) Do not place the heavy objects on the unit. 7) Use only the supplied and approved charger. 8) Replacement or service must be done by qualified service center or manufacturer. CAUTIONS: ELECTRIC SHOCK HAZARD The battery pack used in this device may present a risk of fire or chemical burn if mistreated.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
