User's Manual

04 | SETUP SETUP | 05
pairing your headset
1. Within the Settings' menu,
press X on Accessory Settings.
7. Press X to enter 0000 (four zeros)
as the Pass Key and press X on OK.
10. Scroll down and press X
on Audio Device Settings.
2. Press X on the icon labelled:
Manage Bluetooth® Device.
3. Press X on Yes to register your
Bluetooth® Device.
4. At the next screen, prepare your
headset (from off) to be paired by
holding down the power button
continuously until the LEDs flash
alternate Blue & Red. When it is
connected the LEDs will flash Blue
every 2 seconds. If not connected,
it will flash blue every 4 seconds.
5. Press X to Start Scanning. Once
the scan is complete, the PS3™
will recognize all Bluetooth®
wireless technology devices
within range.
6. Locate PS3 EX-02s from the list
of available devices and press X.
8. You will be taken to a new screen
stating: Register completed.
9. Press twice on your controller
to go back to Accessory Settings.
11. Choose PS3 EX-02s as your input
and output device from the lists.
Press X to confirm your choices.
12. Scroll down and press X on OK.
Your EX-02s Next Gen
Bluetooth® Headset is now
ready to use...enjoy :)
3
SECONDS