User’s Manual
Bluetooth® Headset -1- H032
1. Notice Before Using Thank you for purchasing the Bluetooth® Headset H032. Please read this User's Manual completely before you use the Headset. The H032 has been developed using Bluetooth® wireless technology and is capable of connecting with Bluetooth® devices designed with Audio Gateway. PDAs, Desktops and Notebook computers can be connected and paired with the Headset using a USB Bluetooth® Dongle or built‐in Bluetooth capability (if applicable).
2. Package Contents List Please inspect this package and refer to the package contents list below to verify all items were included in this package: A. Headset..........................................................................................................1 B. Ear hooks .......................................................................................................2 C. Ear gels (3 Sizes) ............................................................................................3 D.
3. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
4. Battery information The device is equipped with an integrated lithium‐polymer battery. The battery cannot be replaced. Do not attempt to remove the battery from the device since it would damage the device. The full performance of a new battery is not achieved until after two or three complete charging‐discharging cycles. The battery can be charged and discharged several hundred times, but it loses its capacity over time.
5. Charging the battery The H032 is operated with a rechargeable battery. Charge the battery completely before its first use. Read the section "Battery information" before starting the charging process. 1) Connect USB cable to a general USB power supplier.
3) will turn on. Charging the battery fully may take up to 1‐2 hours. When the battery is fully charged, the red indicator light will turn blue. Disconnect the charger from the headset and the outlet. The headset is ready to use. NOTE: ‐ For first time use, please charge the headset fully. ‐ The fully charged battery has power for up to 4 hours of talk‐time, and up to 90 hours of standby time.
2) 3) 4) 5) 6) distance should not exceed a meter. Hold the Answer button for approx. 5 seconds until you hear a short‐low signal tone and the indicator light intermittently flashes red and blue. The device is in pairing mode. Pairing mode should engage automatically upon the first time turning on the headset. Find the Bluetooth® setting of your cell phone and start the search for Bluetooth® devices. (For further details, please read the operating instructions of your cell phone).
If pairing is not completed within 2 minutes, the headset will turn off. If this happens, repeat the pairing process. 7. Multi‐connection function The Multi‐connection function allows for the simultaneous use of the H032 with two cell phones. This is an advantage for users with a personal and a business cell phone. Establishing a connection with two cell phones There are several options of connecting the H032 with already paired cell phones.
3) Establishing a connection via the cell phone If the cell phone is not one of the two most recently connected cell phones with the H032, you have to establish the connection via the Bluetooth® menu of the cell phone. After successful connection, you can establish another connection with a second cell phone. This allows you to determine the sequence of connections. If two cell phones are connected with the H032, the cell phone connected first is the first device and the other one the second device.
Press and hold Answer button for 3 seconds until you hear a tone from low to high. The headset is now on. The Blue indicator light will flash blue 3 times. Connecting to a Bluetooth® phone If your headset has completed the pairing process successfully, when the headset is turned on, it will connect to the phone you last connected with automatically. Please ensure your phone's Bluetooth® function is active.
10. Using the H032 Making a call 1) Using phone's keypad In standby mode, dial the number on your phone's keypad to make a call. 2) Use Voice‐Dialing In standby mode, press the Answer button shortly, you will hear a short tone from the headset, and the phone will prompt you to say the voice tag which you have already attached to your contact. If the voice tag is identified by the phone, the related number will be dialed.
In standby mode, double press the Answer button, the last number you dialed will be re‐dialed. Note: If two cell phones are connected with the H032, hold the Volume (‐) button for 2 seconds to dial the last number of the cell phone connected previously. Answering a call When you receive an incoming call, press the Answer button shortly to answer the incoming call; you can also answer the call directly from your phone.
While on a call, press the Answer button shortly to end the call; you can also end the call directly from your phone. Call‐waiting (Three‐Way Calling) Before using the Call‐Waiting function on your headset, please ensure that your phone supports this Hands‐free profile and you have access to the service by a wireless provider. ‐ If there is an incoming call while a call is in progress, press Answer button shortly. This will accept the waiting call and end current calling.
remindful tone every 10 seconds, notifying you that your MIC is still muted and a call is still in progress. Repeat the operation and you will hear the tone from high to low. The mute function is now canceled. 11. Safety and general information 1) 2) Please read this User's Manual carefully and follow all instructions. To avoid any damage or malfunction of the device do not drop the device from high places. Keep device away from humidity, water and any other liquid.
7) 8) 9) 10) 12. Use only the supplied and approved chargers. Please contact the retailer for replacement or support with this product. Unplug this device when unused for long periods of time or during lightning storms. The battery used in this device may present a risk of fire or chemical burn if mistreated. FCC & IC Statement Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
warranty are as follows: Warranty is non‐transferable and is limited to the original purchaser only. ‐ You must be able to prove the date of original purchase of the unit with a dated receipt. ‐ The warranty is not applicable if the product has been subject to physical abuse, improper installation, modification or repair by an unauthorized third party. ‐ Supplier's responsibility shall be limited to the repair or replacement of the product at its sole discretion.
‐ To replace a defective device please contact customer service . Visit our website for more information Bluetooth® is a trademark owned by the Bluetooth® SIG, Inc.
