SH802 Bluetooth Headset User manual ® -1-
1. Notice Before Using Thank you for purchasing the Bluetooth® Headset SH802. Please read this User's Manual completely before you use the Headset. SH802 designed for listening the high quality music wirelessly that based on the latest Bluetooth® wireless technology. SH802 can be easily connected to a mobile phone for call conversation and music listening, it is also capable to connect to the other Bluetooth®‐enabled devices like Notebook, iPod etc. SH802 is compliant with Bluetooth V3.
items were included in this package: 1) SH802 Bluetooth® headset(1) 2) USB Charging Cable(1) 3) User's Manual(1) 4) Ear Cap (2x3 Sizes ) 5) Ear fit kits(2) 4.
⑦ Microphone 5. Battery information The device is equipped with an integrated lithium‐polymer battery. The battery cannot be replaced. Do not attempt to remove the battery from the device since it would damage the device. The full performance of a new battery is not achieved until after two or three complete charging‐discharging cycles. The battery can be charged and discharged several hundred times, but it looses its capacity over time.
4) When the battery is fully charged, the red indicator light will turn blue. Disconnect the charger from the headset and the outlet. The headset is ready to use. NOTE: ‐ For first time use, please charge the headset fully. ‐ The fully charged battery has power for up to 5 hours of talk‐time and 4.5 hours music playing time, and up to 300 hours of standby time.
When the battery power is low, the headset will remind you by voice prompt "Battery low" every 20 seconds, and the red indicator light starts to flash. ‐ For using the SH802 with iPhone, an additional battery meter ( ) will be activated and the remaining battery capacity will display on your phone. 7. Pair to your Bluetooth® phone Before you use your headset the first time, you must pair the unit with a Bluetooth® enabled mobile phone.
3) 4) 5) Find the Bluetooth® setting of your Mobile phone and start the search for Bluetooth® devices. (For further details, please read the operating instructions of your Mobile phone). From the list of devices found, select the "SH802". If required, enter the PIN code "0000" and confirm the entry. Once the pairing process was successful, the SH802 will connect to Mobile phone automatically then switch to standby mode, the indicator will flash blue every 5 seconds.
Turn off the headset Long press the power button for 3s to turn off the headset. the Red indicator will flash red. Note: To conserve power, if the headset is not connected to a device for approximately 10 minutes, the headset will turn off automatically. 9. Selecting the Voice prompt language The SH802 supports voice prompt for the headset’s status announcement in 5 different languages(English, Chinese, Spanish, French, German).
11. Using for music play Play/Pause Press Power/Play button to get the music play or pause. Next/Previous song Press and hold Next button to skip to next song or chapter, press and hold Previous button to go back previous song or chapter. Increase/Decrease volume Press Volume Up button to increase volume, press Volume Down button to decrease volume. Note: The SH802 supports A2DP profile that allows stereo music streaming from a Bluetooth phone.
Last number re‐dialing At standby status, double press the Answer, the last number you dialed will be re‐dialed. Note: the last number re‐dialing is available only for the first device if two Mobile phones are connected. The connection sequence can be determined by reconnect manually. Answering a call Press Answer shortly to answer the incoming call. Reject an incoming call Press and hold Answer for 2 seconds to reject the incoming call.
Volume adjusting Press the Volume Up and Volume Down button to adjust the volume. Mute While a call is in progress, press and hold Volume Down button for 2s to mute the headset, a remindful tone would be heard every 10 seconds. Repeat the operation to un‐mute. 13. Safety and general information 1) 2) 3) 4) 5) 6) 7) 8) 9) Please read this User's Manual carefully and follow all instructions. To avoid any damage or malfunction of the device do not drop the device from high places.
mistreated. 14. FCC & IC Statement Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Note: 1. The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. 2.
radio frequency bands not harmonized within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, and United Kingdom and within EFTA in Iceland, Norway and Switzerland. 16. Warranty The condition of this warranty and supplier's responsibilities under this warranty are as follows: Warranty is non‐transferable and is limited to the original purchaser only.
