User's Manual

ManualsBrandsATI Electronics ManualsAudio EquipmentBluetooth Speaker

6. Listening to Music on Your Speaker

Play/Pause

Press the Power button to get music from your audio source to play

or pause.

Next/Previous Song

Press and hold the Volume + or Volume- buttons for 2s to advance to

the next song or go back to the previous one.

Increase/Decrease Volume

Press the Volume+ or Volume - buttons to increase or decrease the

volume

3 Second

2 Second

5. True Wireless Pairing

The Altec Baby boom supports to connect to the second unit to build

the True Wireless Stereo speaker connection.

a. When a Altec Baby boom is paired to your phone successfully,

press and hold both Power button and Volume - button for 3s to

enter TWS Master pairing mode. The

speaker ﬂashes blue and red

alternately.

b. Turn the second Altec Baby boom on by press and hold Power

button for 3s, and then press and hold both Power button and

Volume + button to enter TWS Slave pairing

mode. The speakers will pair and connect

each other after few seconds. The master

unit will be the left channel and slave one

will be the right channel.

4. Pairing Your Speaker With a Bluetooth Phone

-Press and hold the Power button for around 2s. the device will

power on and enter pairing mode with voice prompt "powering on,

welcome to ALTEC LANSING"

-Go to the Bluetooth Manager of your Bluetooth device. Search

Bluetooth devices and select "Altec Baby boom" to start

connecting.

-If required, enter the PIN code "0000" and conﬁrm the entry. Once

paired successful, the speaker will connect to your Bluetooth

device automatically.

Indicator

3. Charging: In order to charge your speaker's internal battery, connect

one end of the included USB cable to the charging port on

your speaker. Connect the other to a USB port or AC

charging adapter(not included). The LED Light indicator

turns red when charging, and turns blue when fully

charged. Charging may take up to 3 hours.

① Charging Port

② AUX IN Port

③ Power / Play / Pause / Answer

④ Volume –

⑤ Volume +

⑥ LED Light Indicator

⑦ Microphone

① ②

⑥

⑦

③

④

⑤

2. For a look at the various buttons on your speaker,

view the graphic below.

USB Cable

AUX Cable

Altec Baby boom

1. Make sure the following items are

included in your package.

Item # IMW269

Quick Start Guide

RUGGED BLUETOOTH SPEAKER

BABY BOOM

Summary of content (2 pages)

PAGE 1
BABY BOOM Quick Start Guide RUGGED BLUETOOTH SPEAKER Item # IMW269 1. Make sure the following items are included in your package. 3. Charging: In order to charge your speaker's internal battery, connect one end of the included USB cable to the charging port on your speaker. Connect the other to a USB port or AC charging adapter(not included). The LED Light indicator turns red when charging, and turns blue when fully charged. Charging may take up to 3 hours. 2.
PAGE 2
BABY BOOM Quick Start Guide RUGGED BLUETOOTH SPEAKER Item # IMW269 7. Using for phone call Last number re-dialing At standby status, double press the Power button, the last number you dialed will be re-dialed. Answering a call Press Power button shortly to answer the incoming call. Ending a call Press the Power button shortly to end a call. Reject an Incoming Call Press and hold the Power button for a few seconds to reject an incoming call.