User's Manual

- 6 -
2) Press and hold the Power button for about 5 s, the indicator light will flashes
red and blue intermittently, the device is now in pairing mode.
3) Find the Bluetooth® setting of your Mobile phone and start the search for
Bluetooth® devices. (For further details, please read the operating
instructions of your Mobile phone).
4) From the list of devices found, select the "SH5B".
5) If required, enter the PIN code "0000" and confirm the entry. Once the
pairing process was successful, the SH5B will connect to Mobile phone
automatically then switch to standby mode, the indicator will flash blue
every 5 seconds.
Note:
1) If pairing is not completed within 2 minutes, the headset will turn off. If this
happens, please repeat the pairing steps.
2) The SH5B supports Multi-connection that allows for the simultaneous use of
the SH5B with two mobile phones. After paring successfully with 2 mobile
phones, switch off the headset and switch on again, the headset will connect
to both 2 mobile phones automatically. Otherwise, you can connect the
headset on the cellphone manually.
8. Turning headset on /off
Turn on your headset
Press and hold Power button for 3s to turn on your headset. If your headset has
completed the pairing process successfully, when the headset is turned on, it will