User's Manual

Indicater
3. Charging: When charging, a red LED light will illuminate. and the red LED
indicator light turn o when fully charged. Your headphones can take
up to two hours to fully charge.
Technical Support
For technical support issues please visit our website at www.alteclansing.com.
You can find manuals and FAQ's at the website. Can't find what you are looking for? Call
1-855-292-4087 to access our technical support information on the phone.
Important Note
You can also use the 3.5mm Audio Cable to connect audio devices through the
Auxilliary Port on your headphones.
Note that when using the Audio cable instead of
the standard wireless Bluetooth connection, the
Volume Up, Volume Down and Play/Pause
buttons do not function.
Please use your audio source to control these
functions.
Volume Down/Previous
Volume Up/NEXT
Microphone
Charging Port
Power/Play/Pause/Answer&LED Light
Auxiliary Port
2. For a look at the various buttons and parts of your headphones,
view the graphic below.
3 Seconds
12:12 PM
Bluetooth
Bluetooth
Devices
Paired
ON
Now discoverable
Evolution 2
5. Pairing Your Headphones With a Bluetooth Phone
-Press and hold the Power button for around 3 seconds. When your
headphone is ready to pair with a Bluetooth audio source, it will go
into pairing mode, with red and blue LED lights will flash alternately.
-Go to the Bluetooth Manager of your Bluetooth device. Search
Bluetooth devices and select "Evolution 2" to start connecting.
-If required, enter the PIN code "0000" and confirm the entry. Once
paired, the headphone will connect to your Bluetooth device
automatically.
3 Seconds
4. Power ON/Power OFF Your Headphones:
-Press and hold the Power button for approximately 3 seconds to power on
your headphones. Your headphones will automatically connect with the last
phone they were paired with.
-Once powered on, you can press and hold the
Power button again for approximately 3
seconds to power o your headphones. The
LED Indicator light will briefly turn red before
powering o.
NOTE: In order to save power, your
headphones will automatically
power o if left unpaired and
idle for over 10 minutes.
USB Cable
AUX Cable
MZX667 Headhones
1. Make sure the following items are
included in your package.
6. Listening to Music
Play/Pause
Press the Power button: To play or pause music.
Next/Previous Song
Press and hold the Volume Up or Volume
Down buttons for 2 seconds to advance to the
next song or go back to the previous one.
Increase/Decrease Volume
Press the Volume Up or Volume
Down buttons to increase or decrease the
volume.
NOTE: Music will automatically pause when
a call is dialed out or when there is
an incoming call. It will resume when
the call ends.
7. Using Your Headphones During Phone Calls
Last Number Redialing
Quickly tap on the Answer button twice and the last
number that you dialed will be redialed.
Answering an Incoming Call
To answer an incoming call, quickly press the
Answer button.
Ending a Call
To end a call, quickly press the Answer
button.
Adjusting Volume
By pressing the Volume Up or Volume
Down buttons you can increase or
decrease the volume of the phone call.
EVOLUTION 2
BLUETOOTH HEADPHONES
Item # MZX667
Quick Start Guide