Introduction Thank you for purchasing the Vivitar 6+ Bluetooth® Earphones. You can use your earphones with iPads, iPhones, iPods and many other types of smartphones and Bluetooth devices to stream music and enjoy hands-free calling. Please read this manual carefully FIRST in order to get the most out of your earphones.
Important Safety Precautions When using your earphones basic safety precautions should always be followed, including the following: 1. READ ALL INSTRUCTIONS BEFORE USING YOUR EARPHONES. 2. Never expose your earphones to water, excessive moisture, high temperatures, or extreme cold, 3. In order to avoid the risk of electric shock, never attempt to open your earphones or repair them without the assistance of certified professionals. 4.
Package Contents 1. Vivitar 6+ Bluetooth Earphones 2. USB Charging Cable 3.
Features - Bluetooth Technology Allows You to Listen to Music Wirelessly - Built-In Microphone to Manage Phone Calls - Rechargeable Battery Specifications • • • • • • • • • Bluetooth Specification: V3.0+EDR Operation Frequency: 2.402-2.48GHz Supported Profile: HSP, HFP, A2DP, AVRCP Operation Range: Up to 33 feet (10 meters) Talk Time: 2 hours Play Time: 2 hours Standby Time: 2 hours Battery Type: 70mAh, 3.
A Quick Look at Your Earphones ① LED Indicator Light ② Microphone ③ Power / Play / Pause / Answer ④ Charging Port ① ② ④ ③
Charging Your Earphones Your earphones have a built-in, rechargeable lithium-polymer battery. To avoid damage, do not attempt to remove the battery. The full performance of the battery is only achieved after two or three charging-discharging cycles. Charge the battery fully before first use. To do so, follow the steps below: 1. Connect one end of the included USB charging cable to the charging port on your earphones.
Pairing Your Earphones with a Bluetooth Device Your earphones can be paired with most Bluetooth devices including iPads, iPhones, iPod Touches, and most smartphones, laptops and tablets. In order to pair your earphones with a phone, follow the steps below: 1. Press and hold the "POWER" button for three seconds to turn on your earphones. The LED indicator light will start alternately flash red and then blue repeatedly. This indicates that your earphones are in pairing mode. 2.
Using Your Earphones Powering Your Earphones On and OFF 1. Press and hold the "POWER" button for three seconds to power on your earphones. If you have already paired your earphones to your Bluetooth device, it will automatically remain paired each time you power on your earphones. 2. Press and hold the "POWER" button for three seconds to turn power off your earphones. Note: Your earphones will automatically power off when left idle for approximately ten minutes.
Using the Phone Function • Last Number Re-dial: Press the ANSWER button twice to re-dial the last number called. • Answering a Call: Quickly press the ANSWER button to answer an incoming call. • Reject an Incoming Call: Press and hold the ANSWER button for two seconds to reject an incoming call. • Ending a Call: Quickly press the ANSWER button to end a call.
Technical Support For technical support issues please visit our website at www.vivitar.com. You can find manuals, software and FAQ’s at the website. Can’t find what you are looking for? Fill out an online ticket and one of our technical support team members will answer questions or call 1-800-592-9541 in the U.S. or 0-800-917-4831 in the UK to access our technical support information on the phone.
FCC Statement This device complies with the part 15 of the FCC rules. Operation is subject to the following two conditions:(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
EC Declaration of Conformity Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
Vivitar One Year Warranty Card This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.
FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE - AT DISTRIBUTOR’S SOLE DISCRETION -ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR, ITS MANUFACTURERS, OR SAKAR INT.