User's Manual

Installing the Hardware and Software 23

4 Click Next to continue the installation.

5 When the ATI FGL Install dialog displays the components to be

installed click on

. (Depending on which components you

chose different windows might appear. Click on the

corresponding buttons to continue the installation.)

6 When the Installation complete message appears click Next

again. This will restart your computer.

7 Click

Start > Settings > Control Panel > Display >

Settings, or right-click on the Windows desktop, select

Properties and Settings.

8 Set the resolution, color depth, and refresh rate that best suit your

requirements and your monitor's performance.

Note: Use the ATI Monitor and DualScreen dialogs to adapt

each monitor's settings in a dual-monitor configuration.

9 Click OK.

Software Installation for Windows 2000 and

Windows XP

1 Start your system. When the Found New Hardware Wizard

comes up, click Cancel. When the System Settings Change

window asks you to restart your computer, click No.

2 Run the Quick Start utility. The Quick Start utility will start

automatically, if you insert the Fire GL CD into your CD-ROM

drive after the operating system has started. If your CD-ROM

auto-run is not enabled and/or the Quick Start program does not

start automatically:

Click the Start button in the task bar, click Run, and then select

START.EXE from the root directory of the Fire GL CD.

3 Click Start Installation.

Note

Windows 2000: If your Windows 2000 is not correctly

updated with Service Pack 1, the driver installation stops.

Obtain Windows 2000 Service Pack 1 from Microsoft,

update your Windows 2000, and run the Quick Start utility

again