User`s guide

18 Installing the Hardware and Software

Connecting the Cables and Completing the Installation

Connecting the Monitor Cables

You may connect one or two monitors, either DFP/digital CRT

or analog VGA to the FireGL card.

Connecting analog VGA Monitors

Securely attach the monitor’s data cable to the VGA output

connector (1) on the card. Attach the cable to the monitor

according to the monitor's instructions. Refer to the

documentation that came with your monitor if you need

additional installation information..

Connecting a Digital Flat Panel (DFP) Monitor or

Digital CRT Monitor

Securely attach the monitor’s data cable to the DVI output

connector (2) on the card. Attach the cable to the monitor

according to the monitor's instructions. Refer to the

documentation that came with your monitor if you need

additional installation information.

This FireGL card does not support the dual monitor

combination DFP/digital CRT + DFP/digital CRT.

Use the provided DVI-to-VGA adapter to connect

a second VGA monitor

to the DVI connector (2) on

the card.