User`s guide

32 Using Your FireGL Card

2 Monitor Tuning - available only for VGA monitors

• With the buttons in the Move and Size sections you can tune

the position and size of the monitor's display for the indicated

resolution and refresh rate

• Sync Polarity: If you do not get a satisfactory display with

the default sync polarity setting for the current resolution,

you may try and change the settings.

• Undo: Click this button to undo the last change you made

(when you clicked Apply). If you have made a modification

that causes your screen to go blank or to be unreadable, the

keyboard shortcut for 'Undo' is Alt-U.

• Default: Click this button to set the Monitor Tuning to the

manufacturer's default settings.

1 First use the hardware setting controls on your

monitor, if available, to adjust your display size

or position. Then, if needed, use the software

controls in 'Adjustment - Monitor Tuning.'

Check the documentation of your monitor for

information on your monitor's hardware

controls

2 Resizing the display slightly changes the actual

refresh rate. If you operate a fixed-frequency

monitor check the documentation of your

monitor for information on refresh rate

tolerances.

1 Press the ESC key on your keyboard to undo

the changes if your monitor has lost

synchronization. You may also use the

keyboard shortcut for 'Undo'- Alt-U.

2 If you change the resolution (in Settings)

and/or the refresh rate (in Monitor), you may

need to re-adjust the monitor's display.