User`s guide

22 CrossFire™
CrossFire™
The CrossFire™ aspect requires the following components to be available in
order to appear as an option within Catalyst
®
Control Center:
• A CrossFire™-ready motherboard with at least two PCI Express
®
x16
slots.
•Two Radeon
®
X1950 Pro CrossFire™ graphics cards, one of which
must be installed in the primary PCIe™ or BIOS boot slot.
• Two internal CrossFire™ bridge interconnects.
Enable Catalyst
®
A.I. to automatically select the preferred rendering mode for
target applications. For applications that are not identified in Catalyst
®
A.I., or
when Catalyst
®
A.I. is disabled, default CrossFire™ rendering modes are
used. Alternatively you can enable the Super Anti-aliasing mode in Catalyst
®
Control Center.
For the latest information, see the CrossFire™ Web page at:
ati.com/crossfire
To access CrossFire™
• Select CrossFire™ in Advanced View.
Enable CrossFire™
1 From the Tree View pane, click CrossFire™ in Advanced View.
2 Click Enable CrossFire™.
When CrossFire™ is successfully enabled, all display devices, except the one
used by CrossFire™, will be disabled.
Note: CrossFire™ Higher Quality anti-aliasing can be adjusted in the
Catalyst
®
Control Center 3D settings aspect.
hightech_maib -- HIGHTECH -- 202.82.32.137
-- Monday, October 30, 2006