User`s guide

Display Configurations 3
Using Multiple Displays
Display Configurations
To ensure the highest possible performance, only one display device is
supported when CrossFire™ is active. When CrossFire™ is active other
display devices connected to the other DVI connections on both graphics
cards are rendered inactive.
If additional displays are required when CrossFire™ is active, please use
either SurroundView™ (for more information see the SurroundView™
manual) or an additional PCI graphics card.
Your Radeon
®
X1950 Pro graphics card provides hardware support for two
DVI-I monitors and a VGA monitor using the supplied DVI-I-to-VGA
adapter. It also provides TV output via the S-video connection in composite,
S-video, and component TV formats.
The following table shows display configurations available when CrossFire™
is not enabled.
Display
Configuration
Connector(s)
Used
Comments
Single CRT
display
DVI-I connector
with DVI-I-to-VGA
adapter
CRT- cathode ray tube analog display.
Single DFP
display
DVI-I connector DFP - digital flat panel display.
Single TV S-video out The S-video out can also support a
composite connection via the S-
Video-to-Composite adapter.
Single HDTV
display
S-video out to
HDTV (YPrPb)
cable
HDTV - High Definition Television
hightech_maib -- HIGHTECH -- 202.82.32.137
-- Monday, October 30, 2006