User`s guide

Page 8 Installing Your Card
9. Replace the computer cover.
10. Connect the monitor cable to the card.
If you have an Apple monitor, connect it to the Apple
monitor port. If you have a VGA monitor, connect it
to the VGA monitor port. Only connect one monitor
to the card.
If your monitor is connected to the Apple monitor port, it
must support AppleÕs Òmonitor senseÓ protocol, either
directly or through an appropriate adapter. Otherwise,
all of the resolutions supported by your monitor will not
Apple monitor port
VGA monitor port
!
WARNING
¥ Serious damage to your system may occur if you
connect more than one monitor to the card. If you
have more than one monitor you must connect it
to another graphics card.
NOTE
ATIBook Page 8 Wednesday, April 2, 1997 9:50 AM