Installation Manual

• A 2-core wire is required to be fitted from the Door camera unit to the lock.
Depending on the door unit used, which could be switched, 12V DC, or pulse,
you may require an additional power transformer
• The button on the inside of the door assembly allows the door to be unlocked
from inside – even when electricity is not available
• Three keys are provided, which enable the lock to be opened from the outside
at all times
Lock Operation
• Without power being applied, the lock operates as a standard mechanical
lock. It can be opened from the outside using the key, or from the inside by
pressing the Button Release
• When 12V DC is applied briefly, or the Button Release pressed, or the
external key is turned, a small catch is released inside the lock
• Releasing the internal catch allows the Release Roller to push open the
Door Latch. So to test operation of the lock, it is necessary to
press in the
Release Roller