User Guide

Using Your Fire GL 8700 39
Adding a new application profile:
Click the Add button in the Configuration Profiles section
and enter the new application for which you want to set the
configuration parameters.
Modifying the configuration parameters:
To change the configuration settings of a specific application,
for example, CATIA, select the application from the list in the
Configuration Profiles section and click the Modify button.
To remove the selected configuration profile completely, click
Delete.
Note: You cannot delete the factory-set configuration profiles.
If you add or modify a configuration profile, select or clear the
checkboxes in the Settings section according to your
requirements.
Default Settings
Enable 8-Bit double-buffered Overlay Planes
Use 8 bits of each 32-bit frame buffer pixel as double-buffered
overlay planes.
Force copy swap
Force blit copy during double-buffer swap from back to front
buffer.
Wait for vertical retrace
Buffer swap 'synched' to vertical retrace. Enable this function
for best picture quality. If you disable ‘Wait for vertical retrace’
you may experience visual artifacts such as tearing. However,
this function may be disabled for performance benchmarking.
Click the Apply or OK button to enable your Configuration
settings.