User's Manual

AT188N-HF User guide 페이지 17
AT188N-HF User guide
AT188N Product User guide
Company
Atid Co., Ltd.
Doc
Name
User guide
Writer
Won-Tak
Choi
Date
2016-12-15
Ver.
v0.4
④ Select the “1. Scan data” for returning back to Scan mode
6.6 System Configuration
It has to be controlled in the system configuration menu for changing the operating
direction of device, settings for communication function, settings of barcode symbol and
scan mode
6.6.1 Entry for System Configuration
① Turn on the device
② Show the system configuration menu if user press the ▲ button and
Scan button for several seconds.
③ Select the “2. Setup Param” by using either ▲button or ▼ button and
then, enter the configuration menu through scan button
④ If user does not want to change the settings, please go back to scan
mode with “1. Run Program”
⑤ User can check the detailed information on selected item through the
scan button after selecting the preferred item with either ▲button or
▼ button in the system configuration menu.
⑥ For restarting it to scan mode after completing the whole settings and
storing the contents, user has to select the “Save & Exit” after selecting
the “8. Exit”. If user selects the “No Save & Exit”, it will be restarted to
scan mode without storage of adjusted contents.