User's Manual

AT188N-HF User guide 페이지 23
AT188N-HF User guide
AT188N Product User guide
Company
Atid Co., Ltd.
Doc
Name
User guide
Writer
Won-Tak
Choi
Date
2016-12-15
Ver.
v0.4
 Barcode Only: The only reads barcode data will be stored or transferred
 ID+Barcode: ID of barcode and read barcode data will be stored or
transferred
 Time+Barcode: Time data and read barcode will be stored or transferred
 Time+ID+BarcodeMode: Time data, ID of barcode and read barcode data
will be stored or transferred.
 “2. Time format”: In case of that the time will be stored or transferred with the
read barcode, user can set up the time format
 “*” is marked in selected item
 Year: Choose to use the year data or not at the time data (YYYY)
 Month & Date: Choose to use Month & Date or not at the time
data(MMDD)
 Hour & Minute: Choose to use Hour & Minute or not at the time
data(HHMM)
 “3. Quantity”: Choose to input tag quantity. Quantity settings can be operated in
the only barcode mode and its settings might be possible after reading the
barcode tag. User can get AT188N to input quantity from 1 to 9999 and it cannot
read another tag before inputting applicable tag quantity. “*” is marked in default
settings
 “4. Numbering”: Store or transfer the data index when reading the barcode and
RFID tag. If the memory is vacated, it will be started from 1
 “5. Terminator”: Select which letter will be attached at the end of data among LF,
10:00P
?
* Barcode Only
ID+Barcode
Time+Barcode
Time+ID+Barcode
10:00P
?
< < go back > >
Year
*Month & Date
*Hour & Minute