User's Manual

AT188N-UHF User guide 페이지 22
AT188N-UHF User guide
AT188N Product User guide
Company
Atid Co., Ltd.
Doc
Name
User guide
Writer
Won-Tak
Choi
Date
2016-12-15
Ver.
v0.4
the cursor is located and actual reading data can be differently shown up
with the keyboard language settings of host.
 BTH SPP: It will connect through serial port profile and the data to be
transferred will be transferred to serial port (COM port) of host. The host
has to make the separate program for utilizing the transferred data.
 2. Com Mode
Set up the data transferring mode and communication protocol between
AT118N and host. “*” is marked in selected item.
 Realtime-BTH: The read data will be transferred to the equipment that
connects with its device through Bluetooth in real time
 Batch-BTH: The read data will be transferred to the equipment that
connects with its device through Bluetooth (Batch Process mode)
 Interactive-BTH: Link with application program. (BTH_SPP only)
7.2.4 “4. Data”
The contents of this mode are explained on the basis of a situation that device can read
the barcode. The operation can be different when reading the RFID Tag
 “1. Record”: After reading the barcode, user can decide to use the barcode type
ID or time to be appended when storing or transferring the data
“*” is marked in selected item.
10:00P
?
*Realtime–BTH
Realtime–USB
Batch–BTH
Batch–USB
Interactive-BTH
10:00P
?
< < go back > >
1. Record
2. Time format
3. Quantity
4. Numbering
10:00P
?
< < go back > >
3. Quantity
4. Numbering
5. Terminator
6. UHF Report