User's Manual

User’s Guide
14
2. System Reset
If there is no response from the system or an application is locked up and stops responding, and
when you want to upgrade the firmware, reset the system is maybe necessary.
2.1 Sof t Reset
When do you need to perform Soft Reset?
If there is no response for your command from the system, it calls (Hang-up). In this case, you need
to perform a soft reset. Soft reset will end programs and the user memory region w ill be deleted,
but installed programs and data, and so on, are not affected.
[Soft Reset Procedure]
Using the st ylus pe n to press < Reset> bu tton b riefly, th e sy stem will re starting ag ain, after the
screen turns off shortly.
[Soft Reset Result]
 System will be restarting.
 Operating System will be restarting (Windows CE).
 Desktop will appear in about ten seconds.
 User’s changed registry information, copied files and
Installed programs will be restored.
2.2 Ha rd Reset
When do you need to perform Hard Reset?
Hard Reset, which is a lso called Cold Rese t, ena bles t o initiali ze har dware completely. User’s
installed programs, copied files and registry values will keep remained even Si303 performed Hard
Reset, but the real time a nd date will be initialized. So you need to r eset the time and date after
performed Hard Reset.
You need perform Hard Reset when the Soft Reset cannot restore the system.
[Hard Reset Procedure]
Using sty lus p en to Pre ss <Po wer> Button a nd < Reset> Button s imultaneously, the system will
restarting again after the screen turns off shortly.
[Hard Reset Result]
 System will be restarting.
 Operating System (Windows CE) will be loading and restarting.
 Desktop will appear in about ten seconds.
 Time and date window will be popped up and need to reset it.
Reset Button
Power Button