User's Manual

AT570 User Reference

1. 1D barcode Scanner

This chapter introduces the AT570 built in with the 1D, 2D barcode Scanner program to assist

you in making the most out of your AT570

1.1 1DScanner(Demo program)

You can execute AT1DTScanner coded from ATID to make sure that your AT570 scans

barcodes exactly.

Figure 1. Scan Window for 1D image Figure 2. Scan Window for 2D image

1) To execute Scanner Diagnostics

Tap [start] -> [program] -> [Scanner] -> [AT1DTScanner]

Note: If you don’ t have AT1Dscanner.exe(Ver 1.2) File, please look for our staff or visit ATID

web site at www.atid1.com to download.

[Program Release Note]

1. Ver 1.2 : can only read barcode

2. Ver 1.0 : can read barcode and set up symbology

2) Reading barcodes

1. Press the L/R scanning button or Fn4, KBD key to scan barcode. You can also tap the

“ Start” on the screen to scan a barcode when the lager beam is aimed to a barcode.

2. Make sure that your AT570 scans barcode exactly on the demo program.

* The scanned data will be displayed on the screen, if your AT-570 reads a tag exactly.

Figure 3. 1D Scanner Program(ver 1.2)

PDF created with pdfFactory Pro trial version www.pdffactory.com