User's Manual

AT870 User Reference

3) Setting the Emulator

Figure 11. Setting Menu

1. Result Type

There are 2 kinds of method to print the scanned barcode data where a curser is

pointing.

A. Keyboard Event : Print the scanned barcode data like input Keyboard

B. Copy & Paste : Print the scanned barcode data with Clipboard

2. Terminator

You can set the termination code at the end of Barcode Value to tap “ Terminator” .

A. None : No input the termination code.

B. CRLF(Default Setting) : Carriage Return & Line Feed (Enter code)

C. Space : Input Space code.

D. Tab : Input Tab key code.

3. KeySetup

You can make Hardware keys set to aim the lager beam.

A. F1 ~ F8 Key : press those keys on the keypad to read barcode after setting.

B. Gun1, Gun2 : Set for the gun-typed AT870 .

C. KBD/1, KBD/2 key : Same with the F1 ~ F8 Key

D. Left Key, Right Key key : Same with the F1 ~ F8 Key

4. Sound : set the sound On/Off after Scanning Barcode

5. Vibrator : set the Vibrator On/Off after Scanning Barcode

6. Setting : NO use.

7. Close : Make Emulator Program closed