User's Manual

AT870 User Reference
40
Figure 2. 2D Scanner Function
Figure 3. Select symbology Figure 14. set up symbology with detail.
After Scanning barcode, the value you sc
anned will
be displayed on the screen.
* Start H/W button is for only checking H/W.
You can set up the selected Symbology Value
with detail.
Setting all Symbology
Default All : makes all Symbologis set to be factory
default
Enable All : makes all Symbologis enabled to read
Disable All : makes all Symbologis disabled to read
You can set up the selected Symbology Value to
be factory default