User's Manual Part 2

AT870N User Guide
36
- SymbologyConfig : Decoding option settings.
Option window
- Beep: When the scan is successful, beep sound is made.
- Vibrator: When the scan is successful, vibrator works.
- Enable “SCAN” key: “SCAN” key setting.
- Enable F7 key on right side: F7 key setting.
- Enable F8 key on right side: F9 key setting
- Enable trigger: Gun Trigger key setting
- RAW Data: Scan results are displayed in raw data format.
Only supported in 2D scanner.
Capturing window
- Start Preview: Preview stated with 2D scanner
- Stop Preview: Preview stopped
- Do Capture: Save the captured screen
SymbologyConfig window
- SymbologySelection: Set up
the specific barcode type
- Set Enable/Disable Status: Enable or Disable status of All
Symbologies
- Default All Symbologies : Set All Symbology as default
setting
- Disable All Symbologies : Disable All Symbology
- Enable All Symbologies : Enable All Symbology