User's Manual Part 2

AT870N User Guide

1.2 Setting Barcode Emulator

Can input the read barcode values (Notes, Internet Explorer…) where the cursors are located.

Sets the barcode value input method, scan button, scan sound etc. using Barcode Emulator

program.

When opening the Barcode Emulator, if other Barcode programs are being run, please close the

program first to run the Barcode Emulator.

Opening Application

- [Start Button] -> [File Explorer] -> [My Device] -> [Program Files]

-> [ATID_DemoApps] -> BarcodeEmulatorWM.exe

Running Application.

- When running the application, barcode scan icon is created

at the bottom-right corner of the screen. And Barcode scan is

enabled.

- By clicking on the Barcode Icon, Main Menu pops up and the

settings can be changed.

Emulator Main Menu

- Exit: Exit Application

- Vibrator: When the scan is successful, vibrator works

- Beep: When the scan is successful, beep sound is made

- Key Setup: Sets Barcode scan keys

- Terminator: Selects the special character to be added to the

barcode values

- Result Type: Selects the output type of the Barcode value