AT911User Manual Guide (Rev1.0) Android Ruggedized PDA Series Highlights: • • • • • • • • • • Android 2.2 SAMSUNG S5PC110 1GHz Memory RAM 512 MB/ROM 512 MB WVGA TFT LCD 480W x 800L with backlight UHF 900MHz GEN2, ISO/IEC 18000-6C Ovw{pvuP 1D Laser Barcode Scanner WLAN(IEEE802.11 b/g) 3G HSDPA Bluetooth Class II, v2.0 5.
FCC Compliance Information This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
ATID Co., Ltd. #1210, Byuksan/Gyungln Digital Valley II, #481-10, Gasan-Dong, Gumchon-Gu, Seoul, Korea Telephone: +82-2-544-1436 Fax: +82-2-2113-0040 www.atid1.com c 2006 ATID Co., Ltd. An Unpublished Work – All right reserved. No part of the Copyright ○ contents of this documentation or the procedures described there in may be reproduced or transmitted in any form or by any means without prior written permission of ATID Co., Ltd.. or its wholly owned subsidiaries ("ATID ").
User Manual Guide Before begin to use ..................................................................................................................Z Cap1. Using the AT911 ..........................................................................................................5 1. Introducing ...........................................................................................................................5 1.1 Package components ..............................................................
Before You Begin This section provides you with safety information, technical support information, and sources for additional product information. Who should read this manual? This manual is written for the person who is responsible for installing, configuring, and maintaining the AT288. This manual provides you with information about the features of the AT911, and how to install, configure, operate, and maintain it.
4 AT911 User Reference Guide
Chapter1. Caution when you using AT911 Before you handle and operate your device, please through and familiar with the contents of this manual 1 Introduced device ATID AT911 is based android 2.2 O/S system and supporting touch screen display with RFID and Wireless LAN 802.11 b/g (embedded module) 1.
1.2 Name of each part Please check the details of the product areas.
1.
2. Power This section introduces the power system of AT911 as power switch and battery 2.1 Power ON/OFF 2.1.1 Power ON 1. Press power key, the AT911 and the backlight will be on 2. Idle to conserve battery power when power is turned on, the backlight is OFF 2.1.2 P o w e r O F F 1. Press power key, you actually suspend the AT911 and turn off the display and backlight. 2.
2.5.1 Using the adapter 1. Connect the adapter to the power cord. 2. Connect the DC power jack to the AT911 3. When the battery is charging, the LED becomes red (PDA’s power LED is not lit, press the power button on the side) 2.
3. AT911System Reset When the AT911 completely stops responding for your command or an application is locked up and does not respond, and when you want to upgrade the firmware, it maybe necessary to perform a system reset. Caution Once you initiate a system reset, all applications are forcibly closed and working RAM and files are cleared. It is a good idea to store important data in the resident Flash Disk) for this reason.
