Users Manual

AT911 PLUS User Guide
8
Chapter3. Basic Functions
1. Power and battery
PDA is composed of main battery. The Main battery supplies the power to the system and RAM
which can save and conserve the data.
Main Battery: 3.7V 2,200mA Lithium-ion
Attach the main battery to the back side battery compartment of the PDA.
Push the batter lever inside so that the battery is firmly attached to the PDA.
“Refer to 1.1 Battery attaching and detaching”
Connecting adaptor to the PDA adaptor connecting jack, and check if the “Power LED” is Red,
and then charging the power completely until it turns into Green.
⚫ Note:
When the desktop screen shows after starting the system, press the <power> button for a couple of
seconds can reduce the recharging time.
1.1 Detaching and Attaching Main Battery
➢ Detaching Battery
These images as below, shows the back bottom of the PDA.
Slide the battery latch to the right (UNLOCK side), and then lift the main battery out of the
compartment along both sides of groove.
7
Battery Locking Lever