Manualshelf

User's Manual

ManualsBrandsATID ManualsElectronicsWCDMA wireless data terminal
12345678910
AT911N User Guide
8
DC Power Port
USB Synchronization/
DC Power Port
< Bottom >
Chapter3. Basic Functions
1. Power and battery
PDA is composed of main battery. The Main battery supplies the power to the system and RAM
which can save and conserve the data.
Main Battery: 3.7V 2,260mA Lithium - ion
Attach the main battery to the back battery compartment of the PDA.
Push the batter lever inside so that the battery is firmly attached to the PDA.
“Refer to 1.1 Battery attaching and detaching”
Connecting adaptor to the PDA adaptor connecting jack, and check if the “Power LED” is Red,
and then charging the power completely until it turns into Green.
Note:
When the desktop screen shows after starting the system, press the <power> button for a couple of
seconds can reduce the recharging time.
1.1 Detaching and Attaching Main Battery
Detaching Battery