User's Manual

AT911N User Guide

These images as below, shows the back bottom of the PDA.

Slide the battery latch to the right (UNLOCK side), and then lift the main battery out of the

compartment along both sides of groove.

 Attaching Battery

Put the top part of battery into the upward groove, and then press down the bottom of battery

into the battery compartment, slide battery latch to the left (LOCK side) to attach battery firmly

1.2 Charging

You have to charge the battery via dedicated adapter, which provided from the factory.

“Power LED” is Red while charging or is Green when charged completely. When fully charged,

the LED light will be turned off.

 Connecting Adapter

1. Plug in the adapter into the 220V socket.

2. Connect the Mini USB jack to the PDA’s

“USB connecting jack”.

3. When “Power LED” shows red light,

it means that the device is being charged.

1.3 Low power mode (Sleep mode)

Battery locking lever

 Caution:

You must to charge the device using dedicated adapter that is provided from the manufacturer,

or your device might get damaged.