Operation Manual

17
Contents
Declaration of conformity 5
Extent of delivery 17
Characteristics noise values 17
Symbols machine /operating instructions 17
Normal intended use 18
Residual risks 18
Security instructions 18
Assembly 20
Before the first commissioning 21
Commissioning 21
Adjusting the saw 22
Working instructions 23
Maintenance and care 24
Transport 25
Storage 25
Guarantee 25
Description of device / Spare parts 25
Possible faults 26
Technical data 27
Extent of delivery
• Circular saw BMS 250 including
− Power cable and plug
− TCT saw blade Ø 254 / 30 mm x 2,4; 24 teeth
− Folding frame
• Splitting wedge
• Safety guard with exhaust outlet
• Longitudinal stop
• Table length extension
• 2 supports for bench length extension
• 2 bench width extensions
• 2 transport wheels
• Pushstick
• Extraction hose
• screw bag
• 2 spanners for replacing saw blade
• Operating manual
 After unpacking, check the contents of the box
! That it is complete
! Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
Characteristic data of noise
DIN EN ISO 3746 / DIN EN ISO 11202 / ISO 7960 Appendix A
Use of the machine as a bench to circular saw with standard
circular saw blade.
Noise power level
Sound pressure level at
the workplace
No-load L
WA
= 102 dB(A) L
pA
= 98 dB(A)
Load L
WA
= 112,4 dB(A) L
pA
= 102,5 dB(A)
The factor of measurement uncertainty is 4 dB.
The values given are emission values and must therefore not
simultaneously represent safe workplace values too. Although there is
a relationship between emission and immersion levels, it can be
reliably deduced whether additional precautionary measures are
necessary or not. Factors, which can influence the immersion level
currently existing at the workplace include the duration of the effects,
the special type of the workroom, other noise sources, etc. e.g. the
number of machines and other adjacent processes. The permissible
workplace values can also vary from country to country. This
information should however enable an improved assessment of the
danger and risk to be carried out.
Symbols machine
Carefully read
operator’s
manual
before
handling the
machine.
Shut off engine and
remove power cord
before performing
cleaning,
maintenance or
repair work.
Risk of
injuries of
fingers and
hands by the
saw blade
Do not expose to
rain. Protect
against humidity.
Wear eye and
ear protection
Wear dust mask.
Symbols Operating instructions
Threatened hazard or hazardous situation. Not
observing this instruction can lead to injuries or cause
damage to property.
L
Important information on proper handling of the
saw. Not observing this instruction can lead to faults
in the machine.

User information. This information helps you to use
all the functions of the chain saw optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.