Assembly Instructions

Page 1 of 3

Adult Assembly

ASSEMBLY INSTRUCTIONS

Before assembling your esk, please read through theseD

MISSION DESK WITH DRAWER CHARGING STATION

Hexagon Wrench

Flat washer - 8 pcs Wooden Dowel - 4 pcs

Spare - 2 pcs

Spare - 1 pc

Hexagon nut - 8 pcs Wood Screw - 4 pcs

Spare - 2 pcs

Spare - 1 pc

Hexagon wrench - 1 pc

PARTS LIST

TOP PANEL 1 PC

4 PCS

2 PCS

LEG

SIDE PANEL

NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE HEXAGON NUT, WASHER, WOODEN DOWEL,

OR WOOD SCREW ARE DAMAGED DURING ASSEMBLY.

ATTENTION! If you receive a damaged or defective item,

please contact Atlantic Furniture at service@atlanticfurniture.com 1-800-955-3726 / M-F 9:00-5:00 EST

instructions carefully and familiarize yourself with the different parts.

READY

ASSEMBLE

PAGE 1
MISSION DESK WITH DRAWER CHARGING STATION ASSEMBLY INSTRUCTIONS READY Before assembling your Desk, please read through these instructions carefully and familiarize yourself with the different parts. TO ASSEMBLE ATTENTION! If you receive a damaged or defective item, please contact Atlantic Furniture at service@atlanticfurniture.
PAGE 2
STEP 1 Attach the legs (02) to the top panel (01) using flat washers (A) and hexagon nuts (B), tighten with hexagon wrench (C), as shown below.
PAGE 3
STEP 2 Install wooden dowels (D) into the locator holes on (03) as shown below. Repeat with the other panel. Adult Assembly 03 D D Wooden Dowel E D Wood Screw STEP 3 Attach side panels (03) to desk aligning the dowels (D) with the holes in the apron. Be sure the panel is centered before tightening the wood screw (E). E E 03 D 03 D note: panel in center E Congratulations! Your Desk is now ready for use.