Assembly Instructions

Table Of Contents

Page 1 of 3

ASSEMBLY INSTRUCTIONS

Before assembling your end table, please read through these

instructions carefully and familiarize yourself with the different parts.

MISSION END TABLE

A E

Flat washer - 4 pcs Wooden dowel 3/8 X 1 1/4” - 4 pcs

Wooden dowel 1/4” X 1 1/4” - 4 pcs

Spare - 1 pc

JCB M8 - 4 pcs Wood screw - 8 pcs

Spare - 1 pc

Spare - 2 pcs

Allen wrench - 1 pc

PARTS LIST

TOP PANEL 1 PC

4 PCS

2 PCS

1 PC

LEG

SIDE PANEL

LOWER SHELF

ATTENTION! If you receive a damaged or defective item,

please contact Atlantic Furniture at customerservice@atlanticfurniture.com or 1-800-955-3726

READY

ASSEMBLE

Adult assemblyAdult assembly

NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.

PAGE 1
MISSION END TABLE ASSEMBLY INSTRUCTIONS READY Before assembling your end table, please read through these instructions carefully and familiarize yourself with the different parts. ASSEMBLE ATTENTION! If you receive a damaged or defective item, please contact Atlantic Furniture at customerservice@atlanticfurniture.com or 1-800-955-3726 TO Adult assembly NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
PAGE 2
MISSION END TABLE Step 1 Attach the legs (02) to the top panel (01) using flat washers (A) and JCB (B), tighten with Allen wrench (C), as shown below. 02 02 Adult assembly A 02 B 02 02 01 A B B A STEP 2 STEP 3 Install wooden dowels (D) and (E) into the locator holes on (03) and (04) as shown below. 03 Attach first side panel (03) to end table aligning the dowels with the holes in the apron. Be sure the panel is centered before tightening the wood screw (F).
PAGE 3
MISSION END TABLE Step 4 Attach second side panel (03) the same as the first but place the lower shelf (04) in position by aligning the wooden dowels with the holes in the side panel. 04 03 Adult assembly Step 5 Apply presure to eliminate any gap between the lower shelf and the side panel and fix in place using wood screw (F). F F F Adult assembly Congratulations! Your end table is now ready for use.