Installation Guide

READY

ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS

Before assembling your Miami Bed,please read through these

Thank you for choosing our new adjustable height bed frame.

This practical design offers the utmost in versatility.

instructions carefully,familiarising yourself with the different parts.

Page1of3Miami Bed

Instructions apply for all sizes of bed

> Twin > Full > Queen > King

MIAMI BED

HARDWARE

For Headboard,Footboard to Metal Bed FrameFor Headboard,Footboard to Metal Bed Frame

Metal Frame

Assembling by Adult

Phillips Head

Screw Driver

Allen Key

Please note that you will require a Phillips Head Screw-driver and an Allen Key.

Assemble Metal Frame

5/8” Allen Bolts - 8 pcs.

Split Washer - 8 pcs

Flat Washer - 8 pcs

For Headboard,Footboard to metal Bed Frame

PAGE 1
READY MIAMI BED ASSEMBLY INSTRUCTIONS Thank you for choosing our new adjustable height bed frame. This practical design offers the utmost in versatility. Before assembling your Miami Bed,please read through these instructions carefully,familiarising yourself with the different parts. Please note that you will require a Phillips Head Screw-driver and an Allen Key.
PAGE 2
PARTS LIST 01 HARDWARE 02 HEADBOARD 03 FOOTBOARD 04 SIDE RAIL 05 SLAT KIT BOX 1 OF 4 BOX 2 OF 4 02 BOX 3 OF 4 BOX 4 OF 4 04 05 04 01 03 02 STEP 1 02 04 04 04 Using the upper set of pins when using only mattress, and using the lower set of pins if using both box spring and mattress. Attach the Side Rail to Headboard using bed hook as shown. Repeat with the other Side Rail.
PAGE 3
STEP 2 Using the upper set of pins when using only mattress, and using the lower set of pins if using both box spring and mattress. 04 04 03 03 Attach the other end of the Side Rails to the Footboard using bed hook as shown. STEP 3 Phillips Head Screw Driver 05 05 For Slat Kit Assembly,follow Assembly Instruction included with Slat Kit. Congratulations ! Miami Bed Your Miami Bed is now ready for use.