Assembly Instructions

Adult assembly

ASSEMBLY INSTRUCTIONS

Before assembling your bed, please read through these

ORLANDO BED WITH MATCHING FOOTBOARD

Page 1 of 2

Step 1

Instructions apply for bed sizes

TWIN > FULL > QUEEN > KING

PARTS LIST HARDWARE

JCB M6 X 35mm (1 3/8”) - 4 pcs

Spare - 1 pc

Allen wrench - 1pc

Spare - 1pc

ATTENTION! If you receive a damaged or defective item,

please contact Atlantic Furniture at service@atlanticfurniture.com or 1-800-955-3726

NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.

READY

ASSEMBLE

Congratulations!

Your headboard is now assembled.

instructions carefully and familiarize yourself with the different parts.

To ensure lasting safety, we recommend that you periodically check

that all screws are tight and all parts are secure.

HEADBOARD PANEL 1 PC

1 PC

LEFT LEG

RIGHT LEG

FOOTBOARD

Wooden dowel - 4 pcs

Spare - 1 pc

Attach the legs (2) and (3) to headboard panel (1), using wooden dowels (A) and JCB (B).

Tighten with the Allen wrench (C).

PO:

PAGE 1
ORLANDO BED WITH MATCHING FOOTBOARD ASSEMBLY INSTRUCTIONS Before assembling your bed, please read through these instructions carefully and familiarize yourself with the different parts. ATTENTION! If you receive a damaged or defective item, please contact Atlantic Furniture at service@atlanticfurniture.
PAGE 2
ORLANDO BED WITH MATCHING FOOTBOARD READY 01 HARDWARE 02 HEADBOARD 03 FOOTBOARD 04 SIDE RAILS TO ASSEMBLE BOX 1 BOX 2 Adult assembly Step 1 Attach the side rails (04) to the headboard (02) and footboard (03) using the bed hook as shown below. 04 02 UPPER 04 03 04 LOWER Use the upper set of pins when using mattress only, storage drawers or Trundle bed. Use the lower set of pins if using foundation and mattress. Step 2 Lastly, lay slat kit or foundation support board onto the bed.