High Performance Powered Subwoofers 422 SB 212 SB 102 SB Instruction Manual Model 102 SB Model 212 SB Model 422 SB
Safety Precautions Model 102, 212 and 422 SB Powered Subwoofer Safety Precautions CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). No user serviceable parts inside. Refer to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This device generates a fair amount of heat. Make sure nothing blocks the ventilation openings on the top and bottom of the unit.
Subwoofer Rear Panel 3 Instruction Manual 102 and 212 SB Subwoofer Rear Panel Figure 1 1 BASS LEVEL MIN 2 3 4 MAX STATUS ON STANDBY 60 Hz CROSSOVER FREQUENCY 40 Hz 140 Hz 5 PHASE NORMAL INVERT 6 CROSSOVER NORMAL BYPASS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Subwoofer Rear Panel Model 102, 212 and 422 SB Powered Subwoofer 422 SB Subwoofer Rear Panel Figure 1 ON AUTO STANDBY 5 60 Hz Model 422 SB CROSSOVER FREQUENCY 1 40 Hz 140 Hz 6 NORMAL INVERT PHASE 7 NORMAL BYPASS CROSSOVER 8 OUTPUT 9 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Features 5 Instruction Manual Features Your Atlantic Technology powered subwoofer has been engineered using the latest technology and finest components available. It features: ■ A long-throw composite cone driver with a vented motor structure and 2” high temperature, 4-layer voice coil ■ The outputs allow daisy chaining of multiple subwoofers, or as a return path back to the processor. ■ This powerful driver has a very stiff cone that acts like a piston throughout its operating range.
R 6 Connecting Your Subwoofer L/MONO Model 102, 212 and 422 SB Powered Subwoofer Connecting Your Subwoofer Use the low-level (RCA jack) subwoofer line out of your surround sound receiver/processor. Simply connect your subwoofer with a high quality shielded cable as shown in the diagram on page 7. Please consult your processor/receiver manual for further information.
Low Level Connections Instruction Manual Low Level Connections with One Subout/LFE Output Figure 3 Sub Out/LFE R L/MONO OUTPUT INPUT 7
Low Level Connections Model 102, 212 and 422 SB Powered Subwoofer Low Level Connections with Two Subout/LFE Outputs Figure 4 Sub Out/LFE Sub Out/LFE R L/MONO OUTPUT INPUT
Placement and Operation 9 Instruction Manual Placement and Operation Generally speaking, the best location for your new subwoofer is the front of the room, close to a corner (Figure 5). Every room has its own unique sound characteristics, and flexibility in the exact placement of the subwoofer is always desirable. The closer the subwoofer is placed to a wall and especially a corner, the more and deeper the bass response you will hear.
ON AUTO STANDBY 60 Hz 10 Care of Your Subwoofer Model 102,CROSSOVER 212 and 422 SB Powered Subwoofer FREQUENCY CTRIC SHOCK MOISTURE. Dual Subwoofer Placement The Phase Invert Control When two subwoofers are used, you may wish to place them asymmetrically; that is, in slightly different positions in the room (Figure 7). This will reduce common mode room resonances that occur with symmetrically positioned subwoofers. You can also try placing the subwoofers in the same corner, if you wish.
Subwoofer Troubleshooting Guide 11 Instruction Manual Subwoofer Troubleshooting Guide Once your subwoofer is set up, you should have many years of maintenance free enjoyment from your system. However, if you should encounter a problem, refer to the following guide to help you find the solution. If a problem persists, you should contact your local authorized Atlantic Technology dealer. Problem Possible Cause Possible Solution No bass output AC power cord unplugged or plugged into a non-working outlet.
343 Vanderbilt Avenue Norwood, MA 02062 (781) 762-6300 www.atlantictechnology.