THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION, PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot Number: Date: Item #36835516 Infinity TV Stand with Mount Fits PLASMA or LCD TV’s THAT MEASURE 37 to 42 inches. If parts are missing, DO NOT return to the store.To order missing / replacement parts or assembly assistance please call 1-800-747-2660 or mail customer_relations@atlantic-inc.com.
Assembly T ips: Become familiar with the instructions and all parts. Make sure that all parts are in the box and in good condition. . Assemble the product on the open flat carton or a rug to protect the product and your floor. Some heavy products need a second person to assist in the assembly. Use of power tools is not recommended. It is strongly recommended that at least two people carry out the assembly. Assemble the product close to a wall.
Part List Item Components parts list Qty Item Components parts list Qty A 1 I 12 B 1 J 8 C 1 K 2 L 4 M 6 N 15 O 5 P 1 Q 1 R 1 S 1 T 1 D 3 E 3 F 1 G 1 H 2 Tool needed (not included) -2-
1 A J*8 B C 1-Attach frames (B) & (C) to the back panel (A) with screws (J). 2 I*12 B C D D D 2-Fasten beams (D) to the frames (B & C) with screws (I).
3 B C N*15 D D D O*5 3-Place pads (N) on the beams (D) and frames (B & C). Apply pads (O) at the bottom of the unit. A 4 F L*4 E E E 4-Attach holder (F) to panel (A) with screws (L). Place glass (E) on the pads.
5 M*6 E E E 5-Fasten the glass (E) on the beams with screws (M). Do not over tighten screws. 6 H 6-Fasten two TV mounting brackets(H) on the back panel of the TV. Detail assembly instructions refer to next pages.
PAY EXTRA CARE AND ATTENTION TO THIS STEP. MAKE SURE THE APPROPRIATE MOUNTING HARDWARE IS BEING USED PROPERLY. 1. Select correct Mounting Hardware according to the screw hole size on your TV, discard any remaining Machine Screws or Spacers. 2. Carefully lay your Plasma/Flat Panel TV on its Face on a non-abrasive surface, making sure to lay padding undermeath it so as not to damage the screen. 3.
7 For Flat Back TV X X X X X X Ø4 Ø5 (T1~T3 Screws) (U1~U3 Screws) X X Ø6 Ø8 (V1~V3 Screws) (W1~W3 Screws) 7-Insert Machine Screws through Dual-Hole Washers (X) (see Mounting Hardware list), then into appropriate hole locate on left and right mounting brackets(H), and then into TV. NOTE:The position of the Mounting Brackets and Hardware will be determined by the type of TV that you have. These diagrams are not designed to show the exact positioning; they are only to be used as a guide.
8 7-A F H side view 8-After mounting the brackets (H) to TV, hang TV onto holder (F), see (7-A). A 9 K*2 H G T s 9-Attach holder (G) to bracket (H), fix holder (G) and wall strap(S) to panel (A) with washer(T) and screws (K).
(Q) Tool needed(not included) (R) wall strap (S) wall R Q 10- Place wall strap (S) at desired position on the wall. Mark the hole position with a pencil. Drill a hole on the pencil mark made on the wall with a 10mm size Drill Bit. Insert plastic anchor(Q) into the wall. Fasten the wall strap(S) to the wall by inserting screw(R) through grommet in nylon strap(S) and then into wall anchor. Note:Screwing wall anchor into stud is very important in properly securing the stand.
Max. 100 lbs Max. 65 lbs Max. 65 lbs Max. 65 lbs Product Warranty: Atlantic Inc., warrants to the original purchaser that its products are free from defect in materials or workmanship. If after inspection, we find that the product was defective in materials or workmanship, we shall repair or replace the product at our discretion. This warranty does not cover accidental damage, misuse, improper care or alteration and excludes claims for incidental or consequential loss.