Infiniti Shelves Item#: 38408097, 38408098 THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. ESTE FOLLETO DE INSTRUCCIONES CONTIENE INFORMACIÓN IMPORTANTE DE SEGURIDAD. POR FAVOR LÉALO Y GUÁRDELO PARA REFERENCIA FUTURA.
Assembly Tips: Become familiar with the instructions and all parts. Make sure that all parts are in the box and in good condition. Assemble the product on the open flat carton or a rug to protect the product and your floor. Each shelf will hold up to 15 lbs. Use of power tools is not recommended. With each step, first insert and hand-tighten all bolts and screws by hand. After ALL BOLTS are slightly screwed in, fully tighten bolts with Phillips screwdriver in sequential pattern.
Care Instructions: Use electrostatic dust cloths to clean furniture. Do not set hot or cold containers directly on the furniture surface. Instrucciones para el cuidado: Utilice paños de polvo electrostáticos para limpiar los muebles. No coloque recipientes calientes o fríos directamente sobre la superficie de los muebles. Part List/Lista de partes Item Artículo Components Componentes Qty Cant. Item Artículo Components Componentes Qty Cant.
or/o Attach divider (C) to panel (A) with two screws (AA) using a Phillips screwdriver for both assemblies. Fije el divisor C al panel (A) con dos tornillos (AA) usando un destornillador Phillips para ambos ensembles. or/o Attach bottom panel (B) to A and C assembly with five screws AA using a Phillips screwdriver for both assemblies. Fije el panel inferior (B) al ensemble A y C con cinco tornillos AA utilizando un destornillador Phillips para ambos ensembles.
(A) x4 Free Standing Floor/Desktop En el Suelo/Escritorio x28 or/o Sticker/ Pegatina or/o Attach wood dowels (BB) into holes to attach two shelves. Then apply stickers (CC) to unused holes after shelves are assembled. Fije los clavijas de madera (BB) en los agujeros para fijar dos estantes. A continuación, aplique las pegatinas (CC) en los orificios no utilizados después de montar las estanterías.
(B) For One Shelf/ Para Uno Estante Wall Mounting One Shelf or Stacked Shelves Montaje en la Pared Uno Estante o Estantes Apilados Distance between holes/ Distancia Entre Agujeros 20 13/64” 1/4” drill hole Taladro de 1/4 pulgadas Distance between holes/ Distancia Entre Agujeros 20 13/64” Distance between Second shelf holes/ Distancia entre los orificios para la segunda balda 8.5” 1/4” drill hole Taladro de 1/4 pulgadas It is best to place one screw (AA) into a stud by using a stud finder.
(C) For One Shelf/ Para Uno Estante Wall Mounting Side by Side Shelves Montaje en la Pared Estantes Uno al Lado del Otro It is best to place one screw (AA) into a stud. Only screws placed into drywall will use anchors (DD) as shown. Use a level, measuring tape and pencil to mark two holes 20 13/16” apart. Measure 3 5/16” and 20 13/64” across to mark two additional holes as shown. Drill all the holes 1 ½” deep using a ¼” drill bit. Press wall anchors flush into holes not in wood studs.
SAMPLE CONFIGURATIONS (Requires additional shelves/ Requiere estantes adicionales) OPTION 1. OPTION 2.
SAMPLE CONFIGURATIONS (Requires additional shelves/ Requiere estantes adicionales) OPTION 3.
Product Warranty Thank you for your ürb SPACE purchase. This Limited Warranty covers any defects in material or workmanship for purchases made in the U.S.A. and Canada, and excludes claims from conditions, malfunctions or damage not resulting from defects in material or workmanship. The warranty duration is one year. Keep your original proof of purchase (store receipt). If after inspection you find the product is defective, damaged or missing parts, DO NOT return to the store.
