Eclipse 444 CD / 200 DVD
44 U Tools included c 7 Hex Key Patentes de los EUA y países extranjeros en trámite Én sours pour Etats Unis et autres pays étrangers U.S. und andere ausländische Patente sind hängig Tools needed / not included Phillips screwdriver Derechos Reservados / Tous droits réservés / Alle Rechte vorbehalten Hecho en China / Fabriqué en Chine / Hergestellt in China R1.
U 1 - Insert (K) into side panels (E) and (F). Arrows should point towards screw opening, see diagram (1-A) 3 - Fasten (N) to panel (A) with screws (R). Insert pins (P) into the holes. 2 - Screw (L) into panel (A). Insert dowels (M) and plastic inserts (U) into the holes as shown. 4 - Attach (E) and (F) onto panel (A). Lock by turning (K) in side panels (E) and (F), clockwise until it locks. See diagram (4-A).
U 5 - Slide middle panel (D) into groove in panels (E) and (F). 7 - Attach metal plates (O) to left door (G) and right door (H) with screws (S). 6 - Insert dowels (M) into the holes of base panel (B) as shown. Insert plastic inserts (U) and then pins (P) into the holes as shown. 8 - Attach doors (G) and (H) to (A) and (B) with pins (P). Attach base panel (B) to side panels (E) and (F) with screws (Q).
Hex Key 9 - Fasten rotating bracket (J) onto the lower base (C) with screws (T) using provided tool (Hex Key). 11 - Insert pins (P) at desired heights. 10 - Attach lower rotating base (C) to (B) by inserting and tightening screws (T) through access holes, one at a time. 12 - Place shelves (I) on pins (P).
c 7 Patentes de los EUA y países extranjeros en trámite Én sours pour Etats Unis et autres pays étrangers U.S. und andere ausländische Patente sind hängig Derechos Reservados / Tous droits réservés / Alle Rechte vorbehalten Hecho en China / Fabriqué en Chine / Hergestellt in China R1.
