Specifications

ENGLISH
NetFly AP1 24
the Wireless Multi-Function Access Point either directly or through an
external repeater hub or by wireless, and have TCP/IP installed and
configured with a fixed IP address that must be in the same subnet of the
Wireless Multi-Function Access Point. The default IP address of the
Wireless Multi-Function Access Point is 192.168.1.1 and subnet mask is
255.255.255.0. For example, when the default network address of the
default IP address of the AP is 192.168.1.1, then the manager PC should
be set at 192.168.1.x (where x is a number between 2 and 254), and the
default subnet mask is 255.255.255.0.
Please follow the steps below for PC’s network environment installation.
First of all, please check your PC’s network components. The TCP/IP
protocol stack and Ethernet network adapter must be installed. If not,
please refer to MS Windows related manuals.
Before you configure this Wireless Multi-Function Access Point, you need
to know the following default settings:
 Username:admin
 Password:admin
 IP LAN address: (192.168.1.1), Subnet Mask (255.255.255.0)
 DHCP Server: disable
 SSSID= default, Channel=6, WEP/WAP=disable
1.6 IE Configuration
Now open IE, go to Instruments menu, select the Connections tab and
select one of the following options:
 Never use remote connection
 Use remote connection if another network connection isn’t
available
1.7 TCP/IP Configuration
Configuring PC (Windows 95/98/ME)
1. Go to Start / Settings / Control Panel. In the Control Panel,
double-click on Network and choose the Configuration tab.
2. Select TCP / IP -> NIC Compatible, or the name of any Network
Interface Card (NIC) in your PC.
3. Click Properties.