Wireless Multi-Function Access Point A02-AP1-W54 MANUAL A02-AP1-W54

Wireless Multi-Function Access Point
A02-AP1-W54 Pag. 25
• Multiple WDS group application:
When there are five APs to be join into two separated WDS group, the
member of WDS group 1 is AP-A, AP-B and AP-C, and member of the WDS
group 2 is AP-C, AP-D and AP-E, the AP-C will join both of WDS group 1 and
WDS group 2, each WDS Group 1 will be one master and the other will be
slave.
The AP-A and AP-C will be both as a Master AP for both WDS Groups, the
AP-A represent for the master of WDS Group 1, the AP-C represent for the
master of the WDS Group 2 and at the same time AP-C will be the slave of
WDS Group 1, so all of the APs in the two WDS groups must use the same
wireless channel and same security, the Master need to fill all of Slave’s MAC
address in the “Remote AP Mac” list, and the Slave need to fill the Master’s
MAC address in the “Remote AP Mac” list, maximum allow one Master can
be join eight Slaves to be one WDS group.
In this example, LAN-A can communicate with LAN-B and LAN-C, and LAN-B
can communicate with LAN-C through the AP-A. LAN-B will have the same
LAN environment coming through LAN-A.
LAN-E can communicate with LAN-B and LAN-D, LAN-E can communicate
with LAN-D through AP-C, LAN-E can communicate with LAN-B through AP-
C and AP-A, LAN-E will have the same LAN environment coming through